Maltby Hybrids and Utility Iron
If you are unable to schedule and "In Person Custom Fitting", please submit the on-line "General Fitting Form" along with the applicable on-line Fitting Form for the club/clubs you are interested in customizing.
Hybrids priced with stock Aldila NXT GEN NV Graphite Hybrid Shaft and Golf Pride Tour Velvet Standard Size Grip.
Maltby TS-UI Utility Iron priced with FST 90, FST 115 Pro Stepless, and FST 125 Steel Shaft and Golf Pride Tour Velvet Standard Size Grip
Shaft and Grip upgrades available at additional cost.
Maltby KE4 TC Pro
Hybrid
Right and Left Hand
The unique and truer "hybrid" shape that features an .8mm crown thickness and modern crown slope from front to back, saving discretionary weight for improved playability that contributes to the excellent sound and feel produced at impact. The broader crown profile of the TC Pro Hybrid head promotes confidence at address vs narrower and deeper faced hybrids.
The Maltby KE4 TC Pro Hybrid features a high speed 455 Carpenter steel face to provide increased ball speeds from any impact position on the club face. The body is precision cast from 17-4 stainless steel using Advanced Shell Technology (AST) to insure proper mass distribution for optimum performance. Interchangeable head weights are positioned rearward and deep into the club head to produce precise launch angles and allow for custom fitting options.
The KE4 TC Pro Hybrid's dual runner design, wide sole and radiused leading edge help eliminate interference with less than perfect lies for more consistent contact resulting in better distance and direction control.
Maltby KE4 Tour TC
Hybrid
Right Hand Only
The Maltby KE4 Tour TC Hybrids offers an easier to hit replacement for those hard to hit long irons and higher lofted fairway woods.
The overall shape and volume of the KE4 TC was modeled similar to our best-selling KE4 Tour hybrids only with increased playability through improved weight distribution and progressive center of gravity locations to help produce consistent initial launch angles. Positioning internal weight further back on the 2H (17⁰) hybrid and progressively moving the weight forward on 3H (19⁰), 4H (22⁰) and 5H (25⁰) helps to provide a more consistent trajectory for improved distance control. Additionally, as with all the KE4 hybrids and wood heads, an interchangeable 4 gram weight is added deep and rearward on the sole to allow for fine tuning of swing weight, head feel and trajectory.
The KE4 TC Hybrids feature a very thin 2.4mm High Strength Steel 455 VFT Cup Face to increase ball speeds and produce a solid sound and feel.
The crown of the KE4 TC Hybrids features a scalloped crown design to lower the center of gravity.
Maltby STH2
Hybrid
Right and Left Hand
Aerodynamic Speed Fin Crown Design - The aerodynamic crown design of the STh² Hybrids features strategically positioned Speed Fins to help stabilize the head during the downswing for increased club head thrust and resulting in more consistent impacts for improved distance and dispersion.
Head Weight Customization - The STh² Hybrids feature an interchangeable 8 gram weight positioned rearward towards the heel and deep into the club head to allow the club face to more easily rotate back to the square position during the downswing for improved shot dispersion. The stock 8 gram sole weight is interchangeable using the Maltby T-25 Torx screw weights by +/- 6 grams to allow for multiple shaft weight and shaft length options without sacrificing the feel of the overall assembled club.
Precision cast from 17-4 Stainless Steel featuring a strong but flexible 0.8mm crown thickness to increase flexibility and a VFT (Variable Face Thickness 2.5mm - 2.2mm) club face design to maximize ball speeds from any impact location on the clubface.
Maltby TS-UI
Utility Iron
Right Hand Only
The Maltby TS-UI utility is multi material club head designed to increase ball speed via the MS300 (chromoly/maraging) forged face material for increased ball speeds. MS300 is the strongest material used in the golf industry but with a very high yield strength for flexibility. The TS-UI utilities are injected with a light weight, low density polymer for exceptional sound and feel at impact. The body is manufactured from soft 8620 carbon steel for increased adjustability for a greater range of loft and lie options which is critical to the hybrid/utility performance.
The TS-UI also features an interchangeable screw weight strategically located low in the toe of the TS-UI club head for centered and low center of gravity to produce solid high flying golf shots.
Superb, playable forged utility/driving iron in a design preferred by many better players for controlled shots from both the tee and fairway.
Light density polymer injected into the cavity reduces vibration and greatly enhances feel and sound.
“MG” (Multi Groove) technology places more grooves on the face for improved consistency in trajectory and spin.
No specs available as item is being discontinued. Heads for customization are still available as 3, 4 and 5 iron replacements until such time as current stock is exhausted. This item is still available so long as it appears on the website.
